Polbrook Gurney Colliery Halt

nevard_130121_PGCH_IMG_2747, a photo by nevardmedia on Flickr.

Polbrook Gurney Colliery Halt is Polbrock as serialised in Model Rail last year, but now in the process of being extended width and lengthwise to incorporate a Bristol coalfield inspired colliery from my moribund Mendip Colliery project.

The layout here looks more complete than it really is, the photo here being the result of carefully lining up  colliery buildings behind Polbrock, which earlier today was extracted from its diorama case.

The sky I admit has been Photoshopped in, but is very similar to what I have planned to go behind this somewhat bigger metamorphosis of Polbrock. The new backscene will be around 18 inches high to allow photos like this without having to resort to filling in the sky to cover up the ceiling or exhibition hall with a photo-editing programme.

Anyway, enough rambling, I need to pull my thumb out to get it finished in time - First outing is RAILEX end of May!

A most unusual GWR branch line terminus!

Click to enlarge

 St Albans Model Railway Exhibition is one of the first on the new year calendar, but despite being a model train loony for more decades than I really want to mention, it's not one I've had the pleasure of visiting before so I took out a small 'payday loan' to afford the rail fare (kidding, but don't start me).

This show, out of the many I have visited over the years appeared to embrace a broader spectrum of layouts than many others I've been to, with everything from 2mm finescale (2FS), 3mm to the foot, depicting Brunel's 7 foot(!), P4, S Scale, OO, N, 0 gauge and so on, with a little HO thrown in for good measure. As I write this, I don't think I've ever been to a show with so much variety on the scale/gauge front ever - apart from maybe The Warley Show at the NEC.

Click to enlarge

For many people, the key thing is the distance between the rails and the flange gaps is paramount, that's fine of course, as long as all else is equal with the rest of the modelling to match, but I personally look for something that congers up emotion and atmosphere. I want that special something that makes you feel like you're really there, or at least looking at an old Colour Rail slide, but in 3D and with movement.

Earl's Court, illustrated here is just one of those layouts,  it depicting a 'could have been' LMS/GWR joint 'overground' terminus in West London during its final years - a most unusual GWR branch line terminus! Having lived in the capital for many years, it has all those key features that shout 'West London'; the rundown cramped location, much of it still showing signs of wartime damage from 20 years prior with the yet (and never) to be replaced canopy, a mix of Western Region diesel multiple units, a little mixed WR/MR steam and some 4 rail activity, milk tanks, parcels stock and so on. Despite run down location there are is a hint of modernisation, with new fluorescent platform lamps contrasting with much wrought iron from the turn of the century, the old century that is.

With a model as well observed as this, the gauge, scale, flange width or the code of rail is totally unimportant. Don't worry I'm not anti the 'correct gauge' thing, but I do think that maybe all those other less obvious things that make a layout 'real' should also be looked and maybe greater emphasis on design, composition and colour should not be forgotten. The key to that, is looking at the real world, whether it be first hand, photos in books, or the internet, then throw away the calipers and absorb the atmosphere. For me, all that was missing was the smell of disinfectant, the pong of a bad sewerage system and maybe the smell of that new Chinese restaurant that's just opened next to the coffee bar with Radio Caroline playing on that new new fangled battery powered transistor radio.

Visit Earl's Court's (the model) website here http://ecmr.webs.com/

Wednesday's Load of Old Rubbish

 October 1962 saw a curious working from Sheffield which required an Eastern Region Class O1 working along this former S&DJR line to Catcott Burtle. It's believed that the MOD were involved in what was a very dangerous time during the Cuban Missile Crises with WW3 almost breaking out. Was the gunpowder van hiding something far more sinister? We'll probably never know.

The joy of toy trains is that one can create and write all sorts of rubbish to support rose tinted excuses to run what ever one wants to run. The above being my excuse for a loco well and truly away from its beaten track which would have been from the other side of the country. Mix a bit of real history in and it's a little more believable and is probably good enough for most, apart from those that don't really enjoy the hobby and the fun escapism it brings to most of us.

Click on the photo to enlarge by the way...

Tuesday Photo

nevard_130104_catcott_IMG_2487, a photo by nevardmedia on Flickr.

For a short wihile in 1962 Stanier 4MT tanks were tried out on the former SDJR system. Captured through the photographer's new 200mm lens, the dark sky in the distance would suggest a thunderstorm over the Bristol Channel.

Anyone with a litle knowledge of this now gone but much loved route will know that te above is a load of old balony. However various engine types were tried out over the former Somerset & Dorset Joint Railway network, with some quite oversized engines appearing during the line's final few years. In the autumn of '63 BR Standard Class 9 locos with their large (by British standards) 2-10-0 wheel configeration  returned, not to haul summer Saturday expresses but the Bath to Bournemouth 3 coach stopping service. Later BR Std Class 4 tanks appeared to on the 'mainline' too as dieselisation cascaded engines to 'lesser routes'.

Much of the 'Branch' (Evercreech to Highbridge and Burnham on Sea) went across the Somerset Levels following the route of the old Glastonbury Canal, and I believe much of it floated over the extensive peat bog probably using branches from the locally willow tree as a base. For this reason light weight engines were usually the norm. A railtour in the early 1960's did however bring a couple of SDJR 7f goods locos down the line and I imagine Highbridge Loco before 1930 bought severaly bigger types through too.

However despute the above, I do think the above large Stanier Class 4 tanks fit in quite well, so in that parallel universe of 'it's my trainset' who knows!

Happy New Year

nevard_121229_catcott_IMG_2368_OLD, a photo by nevardmedia on Flickr.

Above is an old Agfa CT18 slide of dropping off water churns at Catcott Crossing taken around 1962. It's going to be quite a job to restore this one to clear away the mould and scratches. The lens on the original camera was not that great either, with quite a bit of astigmatism at the edges of the field. Luckily though the photographer had his twin lens Rollei and grabbed a decent B&W shot here.

Well that was 2012, and quite a busy year it's been with another layout making its debut in the form of Polbrock, and then there's been all the magazine photography which has taken me up, down and across the country to play with and photograph other people's cracking and lovely layouts for Model Rail magazine.

2013 promises to be equally busy with the diary already full almost through to the summer on the layout photography front. I also have to extend Polbrock by 100% to incorporate a colliery - the deadline with that being Railex at the end of May so I need to think about cracking ahead! I also have some features to write too covering various railway modelling subjects. Luckily I have wound down my television work to a minimum to incorporate all this extra toy train stuff.

In the mean time, let me wish you a fabulous, exciting and prosperous new year!

Water Delivery

nevard_121229_catcott_IMG_2378, a photo by nevardmedia on Flickr.
Click on the above photo for a bigger version with extra notes about the modelling!

The photo above is a reminder of hot summer days for those of us in the northern hemisphere, with this photo depicting the regular fresh water delivery for the crossing keeper and her family.

Many rural outposts on our railways before Mr Beeching killed most of them off were remote from electricity and even mains water. Catcott, a small crossing, half a mile of so east of Edington Burtle in the middle of the Somerset Levels was just one of these spots, the remote keepers cottage not having water on tap, although the swan necked lamp seen just above the car would suggest there was electricity!

To get around the water issue, drinking water would be delivered as required in a milk churn, it frequently being carried on the footplate of a passing loco or train and dropped off. Exchange of a quick cuppa or some vegetables from the obligatory crossing keeper's allotment could also be known to ensure a supply of coal too - though that was strictly unofficial!

The engine here, an ex-GWR Pannier Tank number 4631 was one of the few allocated to the former Somerset & Dorset Joint Railway route as a result of the Western Region takeover. By the early 1960's these small but powerful locos could often be seen sharing Highbridge branch duties with Ivatt Class 2 tanks and ex-GWR Collett 0-6-0 tender locos which had replaced the old ex-Midland 3F 0-6-0 and Midland 0-4-4 1P tanks which had operated the line for many years.

The old Austin which appears to be devoid of a number plate is probably illegal, even when this photo was taken around 1963 it would have been the best part of 30 years old and probably none too roadworthy!

Merry Christmas!

31272 & 31230 power a coal train through Finsbury Park. January 1987. Rolliecord, Ektachrome 100.

Enjoy your day where-ever you are, and if you're a toy train fan I hope that Santa bought you lots of toys. Enjoy!

Chris Nevard

Cement Quay gets packed up for Xmas

nevard_121221_CQ_IMG_2143, a photo by nevardmedia on Flickr.

The photographer's 1956 MG Magnette ZB in 'duo-tone' takes pride of place in front of Hymek No. D7013 on Cement Quay.

Due to the Christmas festivities, my 'playroom' is sadly needed to sleep guests so this will be the last shot on Cement Quay for a bit. I set it up in September for a 'day or two', but somehow or other 3 months on and it's still sat there! Still, it's given me a chance to mess about with it and see what it looks like with steam loco and early diesels in preparation for its next outing which is likely to be Model Rail Live as and when that happens.

On the note of early diesels, the Hymek is a 40 year old Triang Hornby one, which around a decade of so I rewheeled with Ultrascales and reworked and repainted the body. I also took the opportunity to lower it by a couple of millimeters too, which I think improves it's look.

Insert a shim to lower the motor bogie. The one on the other end, just file the base away a similar amount.

The newer Heljan offering of this loco is of course better in many ways, but if this re-worked Triang loco from the early 1970's if on its own it still looks the part I think. And curiously the 40 year old 3 pole motor still runs a dream, it working very well indeed with a Gaugemaster Feedback controller, allowing slow crawling speeds you'd tend to expect with modern ready to run with all their flywheels and other clever bits.

The MG Magnette ZB (Oxford Diecast) in 'duotone' was one of those rash purchases down the local Model Zone -  a snip at a mere £2.99 - less than a pint around these parts! It's has a little dusting of Tamiya Matt to kill the shine.

Loco Focus: Modified Hornby 'Evening Star'

nevard_121220_CQ_IMG_2131, a photo by nevardmedia on Flickr.

Looking perfectly at home on Cement Quay, a chopped about, repainted, renumbered and weathered Hornby 'Evening Star', now masquerading as 92224.

Around 10 years the modified engine which involved replacing all the moulded hand rails was treated to a Modelyard loco-drive chassis. The more recent 9F releases from Bachmann and Hornby Railroad have made such conversions redundant and whilst Modelyard no longer do this conversion, I'm pleased to see that they have evolved to suit present day model railway fan's requirements - http://www.modelyard.co.uk/

An area I will look at is the airbrush weathering, things in this area have moved on in recent times with heightened skills and techniques acquired over the last decade or so since I acquired and modified this engine.

Model Rail Feb 2013 (178)

Model Rail Feb 2013 (178)

With 13 issues a year the months start to get a little out of kilter around this year, so the issue after this one will be called 'Spring' I gather. Anyway, that's a minor issue when you get an extra magazine each year because it's every 4 weeks rather than monthly.

All the Hornby 2013 news and the background to what's happening - and a round-up of new items announced or launched at Warley.

Check out our latest limited editions and place a pre-order, plus there's a new batch of four Sentinels coming in 2013 - find out which new liveries we've chosen.

Reviews include the Hornby 'B17' 4-6-0 and 'O1' 2-8-0 - probably the first time we've had two new Hornby locos in a month.

Also the lovely Bachmann 'C' class 0-6-0, the LMS Compound 4-4-0 and the Graham Farish 'N' Blue Pullman and the Dapol 'N' Class 27. In fact 
SEVENTEEN pages of reviews!

Layouts:
Horseley Fields - modern image 'N' gauge (photography by Chris Nevard)
Brinkley 'P4' LMS/BR MR (photography by Chris Nevard)
Brucklay 'EM' green diesel era.

Masterplan: The final installment of Paul Lunn's 6x4 designs, and something VERY different.

Workbench:
Masking models
DRS Class 37/6
LMS 40ton coal hoppers
Baseboards without wood

All the regulars including Q&A, Exhibition Diary and Backscene.

Chris Leigh
To order a sub visit www.model-rail.co.uk 

O1 for London

nevard_121218_thompsonO1_DSC_2375, a photo by nevardmedia on Flickr.

Stratford (East London) shed's Thompson O1 No. 63650 has been spotted on Cement Quay between duties a somewhat long way from 'The Smoke', but as somebody recently commented on one of the toy chuffer forums 'these locos had rubbish brakes' so that could be the reason why it was spotted here right down in Gloucestershire - it over ran a bit!

The joy of an industrial layout like this is that it could be almost anywhere, which is a great excuse to run whatever pleases, which is great because my current interest loco-wise is in big 8 coupled goods locos!

Catalogue dribblers will know that 63650 with 'early crest' is not one of the options for this new release, that's because yesterday afternoon I decided to repaint, renumber and weather up a LNER liveried one I had in my possession. Looking for colour prototype photos, the excellent 'Steam in England' featuring photographs by the great R.C. Riley came up trumps with a nice photo of this hardy Eastender captured on Stratford shed sometime in the elate 1950's.

Converted from an O4 in 1945, this sturdy engine lasted right through to the classes final year in 1965, and I've tried to depict the engine much as it would have been between exams, not a complete wreck, but as a machine that's seen a bit of use.

The favoured way these days to weather up engines and rolling stock is to use an airbrush, but despite owning a couple of these useful tools (in the right hands), these days I like to weather just using brush techniques. One reason is because being lazy by nature I hate cleaning airbrushes, and the other because I'm more confident with a brush in my hand along with a good period colour photo to copy for inspiration.

The brush technique will form a Workbench feature in a future Model Rail, I've taken the step by step photos but now need to put a few words together which will hopefully make some kind of sense. In the meantime, if you want a closer look at the above photo, click on it for other viewing size options. And before some sniffy type comments, yes I know it needs a crew, coal and lamps. 

Friday Photo

nevard_121213_Q1_IMG_1984, a photo by nevardmedia on Flickr.

With a gale blowing outside confirming that it really is winter, here's a rose tinted view of railways as they were - well, in our memories anyway!

Bulleid 'Coffeepot' Q1 Class No. 33019 with a Redhill to Reading service storms past an ex-GWR pannier tank in the summer of '62 taken on my loco train photothingy. I really must add some fishplates to the track sometime!

Into the Sunset

nevard_121212_Q1_IMG_1961, a photo by nevardmedia on Flickr.

In the last rays of sunlight during the autumn of 1963, Guildford Shed's 'Cofferpot' No. 33019 briefly lets off a good clag as it heads west after a water stop at Basingstoke.

Those who follow me on Facebook will have seen this photo, I find it like with this blog a useful tool to show off photos, especially now that the new Facebook layout allows much bigger less compressed photos to be displayed.

This photo seeing I don't have a time machine is one of my frequent lash ups in the studio using the customised Hornby Q1 I discussed in my last blog post earlier in the week. The photo took about 5 minutes to set up and shoot, just using a single light source off to the left with the angle allowing light to reflect off the loco straight into the lens. The sky and smoke; I have to confess to using  Photoshop to laminate an early morning West London summer sky and smoke from a full sized GWR Pannier tank taken on some photo-charter a few years ago.

Purists would of course take their model outside in the correct weather and photograph it against the sky 'live', they'd then hide behind the loco smoking a cigar puffing smoke upwards. But no, it's too cold and I don't smoke, so prefer this method especially for this time of year!

Bulleid's Austerity

nevard121212_Q1_IMG_1957, a photo by nevardmedia on Flickr.

This Hornby Bulleid Q1 has been renumbered as Guildford Shed's least glamourous No. 33019 and is midway through my non-airbrush weathering.

I used to airbrush weather all the time, but now favour pigment washes and drybrushing, these giving me giving far more control and a slightly more random effect like the real thing.

In time the upper surfaces will receive a little matt varnish misted on from above to suggest fallen ash (Testors Dullcote from an aerosol), otherwise I favour the slight sheen of a working engine, remembering clambering around mucky working engines in Poland in the very early 1990's. Working steam has more of a warm smeared sticky Christmas Pudding look than pure Barry Island rust often portrayed.

I tend to weather in stages, splitting into different sessions over a few days rather than all in one go, I can them appraise the result in different light including that of the layouts it will be running on. It also allows the paints to set well between sessions.  

Airfix 15-ton Diesel Hydraulic Crane

Click to enlarge

I was having a tidy up earlier putting wagons and locos away that were littering the spare room and can across this old  Airfix 15-ton Diesel Hydraulic Crane.

Click to enlarge

It formed part of a huge second hand job lot I bought when getting back into the hobby a decade or so ago, and was built by its previous owner from a kit originally dating from 1962.

In more recent times this useful and fully working model (part from moving under its own power) was produced by Dapol, so those who fancy one will stand a good chance of finding one for the price of a couple of pints on Ebay or one of the tat stores that spring up at smaller railway shows.

I must say that I think it looks spot on here, the posed scene here depicting a steel girder load that needs unloading onto the quayside for some heavy construction work no doubt.

Black & White

Brewhouse Quay; the strong graphic quality means
that colour would add little if anything. Red and yellow
channels were lightened a little during B&W
conversion to add mid tone contrast to replicate how
B&W film would record such a scene.
 CLICK TO ENLARGE!

If you look on model railway internet forums it's common to see dull flat photos of toy chuffers in black and white. Apparently to many forum-flies, many layouts and modelling 'look more realistic', but hits on my website when I publish both colour and B&W of the same photo would tend to suggest that colour always wins on the 'hit' front by around 2 to 1.

I think much of the time why modellers prefer B&W to colour is because their white balance is so far out, so converting that shot to monochrome gets around that issue. We've all done it I'm sure, especially if trying to shoot something at a show with all the mixed lighting casting different colours on everything, or if you're a bloke, simply not reading those new camera instructions to work out how to set the white balance!

Tip: shoot RAW and write your white balance later at home if your camera allows!

Very occasionally I do get that shot which gets more B&W hits than colour, this is probably something to do with the lighting and composition. Those shots tend to have a strong graphic quality, any colour adding little or no value. Luckily these lazy days we can make that choice in the virtual darkroom at a later stage. But if shooting a B&W shot specifically, it's always good to 'see' in B&W at the taking stage, concentrating on those aspects that make a B&W shot work by ignoring the colour aspect. Google Colin Gifford or Bill Brandt and you'll see what I mean.

Tide out at Le Touquet - originally a colour shot, but the
blue channels darkened and yellow channels lightened during
B&W conversion to replicate the effect of B&W film shot
through a red filter. CLICK TO ENLARGE!

Many think that turning a digital colour photo into B&W is simply a matter of converting the image to 'greyscale'; of course you do get a B&W image, but it will often look muddy, lack contrast and the tone separation between what were originally the coloured areas like duotone carriage liveries (especially 'blood and custard'). This is because B&W film, even though it is monochrome does see colour and records it differently to a simple grey scale conversion. In the days of B&W film, photographers would exploit this aspect further by adding coloured filters to their camera lenses to produce differing effects.

The most popular filter was yellow, the yellow filter brightening yellows and green in a landscape (or the yellow end to a loco) and darkening the blues, great for a summer days when wanting to separate the fluffy white clouds from the blue sky. For more extreme effects orange or even red filters could be used, red in particular darkening the blue sky to almost black and lightening the yellow/red end of the spectrum to make these colours appear white in monochrome. For railway photographers this could give the most most bazaar effect to a BR Blue loco on a sunny summer day!

A Midland 3F on Catcott Burtle, originally in colour, as before
the  yellow and red channels were lightened a tad and the
 blue channel darkened a bit at the B&W conversion
 stage. The effect is similar to what you'd get shooting outside
 on a summer's day with a yellow filter on the camera lens
when using B&W film. A simple grey scale conversion of the
 colour photo would be lacking in contrast in the grass and
 sky, yellows and reds in particular becoming far too dark and 
muddy during a straight greyscale conversion.
 CLICK TO ENLARGE!

In the wacky world of digital, you can do much of the above with your editing software by adjusting the colour intensities when B&W converting. I'm not going to tell you how here, but have a quick Google on the subject and try for yourself, you'll never be satisfied with a simple grey scale conversion ever again and may even get that rare shot that's more popular in B&W than colour.

To celebrate B&W in miniature, I have created a Flickr collection of some of my favourite B&W shots - they can be found here.

Photo for Monday

nevard_121203_CQ_IMG_1787, a photo by nevardmedia on Flickr.
BIGGER version here

Monday is often a miserable day for those in the 9-5 rat race, so hopefully this photo of my 30 year old LMS 4F will add a little cheer to the gloom. But listening to the news as I type type would suggest that today will be the busiest day for internet shopping - so hopefully you've put that order in for the rolling stock or book you need for that latest project.

The above photo was taken at around 05.40 (don't ask) this morning, I have the photographic lights set up around Cement Quay currently so it was just a matter of turning them on and popping the Box Brownie onto a small bean bag to grab this view as if one was afloat on the water without a paddle.

Gunpowder Van

nevard_121118_GWR-gunpowder_IMG_1682, a photo by nevardmedia on Flickr.

This afternoon I finally finished the Parkside Dundas (PC86) GWR 10 Ton Gunpowder Van Z2 kit that's been in the workbench for a few weeks.

The lettering/numbering is homegrown and a chance to try out the Crafty Computer Paper DIY transfer sheets.

Painting and weathering is my usual build up of washes, blobs of paint and dry brushing. I prefer to work this way over airbrushing these days. These steel bodied wagons are always a joy to replicate with the tin worm which took over due to our wet climate.

Technique: Quick Cobbles

Cobbled yards are quite easy to do when you know how. The delighful little loco here was loaned by Tim Maddocks, see his website at www.enginewood.co.uk

There are lots of ways to do cobbles; many use embossed plastic sheet, which is fine but cutting out sections to the correct shape to bed in neatly around curved track is far from easy and of course you have the problem of hiding joins. Others use plaster or Das modelling clay, let it set and then have the long job of handscribing  - this could take several weeks even for just to do a few square inches.

Or you can use this method which is quick, easy and ensures a degree of sanity can remain in this already loopy hobby of ours.

First add a layer of Das modelling clay; if the surface is smooth, paint on a little white glue first to help the clay adhere. Use a beer bottle (drink the contents first if you like, or save to the end as a reward) to roll the clay into place if it helps.

Fingers and a stiff brush can also be used to pummel the clay into place. Don't do too big an area in one go because the clay will set, time depending on whether you're here in the UK in a cold damp shed at the bottom of the garden or in California in a tin roofed garage. Do a test first to see what suits you and your environment.

Where the clay butts up against the track, keep it a little lower than the rail head (approx 1mm), this will make cleaning the track easier and will minimise the chance of damaging the cobbles with a track rubber.

Next use a ball point pen with the writing bit removed. Just press the tip into Das modelling clay lots of times. The area here which is around 6 by 6 inches (15cm) took around 10-15 minutes.

Then when set (overnight), spray paint black (Halfords auto spray is good) then drybrush on lighter stone coloured tones, beige, grey, cream using your favourite hobby paint.

This whole area (3ft x 18 inches) was about 3 hours work including the painting (not including the overnight Das drying time).

Open another beer.....

Roving Camera 3: Warren Lane

On the eve of the falling of the snows in the middle of December 2010 I was very privileged to be invited into deepest Essex to photograph Warren Lane a super present day depiction of a modern container terminal.


As you’d expect the container gantries all function via remote, so trains as they come and go can be loaded and unloaded which adds interest beyond that of trains simply coming and going.

We often tend the think of ‘modern image’ model railway buffs as box openers rather than modellers, the Warren Lane team buck this, with nearly everything being scratchbuilt, from the overhead electric catenary right through to many of the specialist road vehicles designed for moving the containers about the terminal. The working gantries are Heljan, but they have been cleverly repainted into Freightliner colours to remove them as far as possible from out of the box condition.

Enough from me, take a look at the dedicated website at www.warrenlane.co.uk and pick up a back copy of the June 2010 issue of Model Rail Magazine

My Workbench

nevard_110303_brewhouse_IMG_9319, a photo by nevardmedia on Flickr.

Many people presume that I have some kind of dedicated workbench area for my various projects, but I'm not really a fan of hiding away in some little boxroom, preferring daylight and being around my nearest and dearest.

Above is the 'workbench' used for much of the construction of Brewhouse Quay, in this case being the dining room table. Being good you might notice the rug used to protect the wooden surface from scratches, but you may also notice that I was probably going to be told off for not putting a mat under the tea cup, especially seeing it appears to have slopped a little.

As always Fleur (pussy cat) like to get involved with what's going especially seiing I'd just plugged the soldering iron in to heat up - bless.

Benchvent, suppliers of hobby extractors are currently running a competition for workbench photos, this spurred the above photo to be extracted from the bowels of my photo-archive....

http://www.benchvent.com/blog/show-us-your-workspace-and-win-an-exagon-r/

View from the fiddle yard

nevard_121108_BQ_IMG_1385, a photo by nevardmedia on Flickr.

I'm always keen to try out new angles on my layouts, and it's after exhibiting Brewhouse Quay at Wycrail last weekend became aware of this never before tried view from one of the other fiddle yard exit points on BQ when messing about at the show with a camera. In fact unless one has a really small head it's not possible to see this, but today's little high quality cameras can get into all sorts of places- ohhh errrr.....

Note how the canopy has been cut back over the years, the most recent modifications since the local take over of local line by the BR Western Region with their even bigger locos. Well, that's my story, but in reality I should have mounted the building a tad higher! Still, this osrt of thing happened in eal life!

30587 after residing at Eastleigh for a few months in 62/63 after finishing on the Wenfordbridge line, ended shunting Brewhouse Quay sidings until the late 1960's - its short wheelbase and nimble frame being ideal for this little known brewery railway network. Shortly after this photo was taken, the engine was painted green, lined out and named 'Mashtun'.

Wycrail - Jolly Good!

IMG_1212, a photo by nevardmedia on Flickr.

Well, that was Wycrail that was! As what a fun day it was too at the brand new and even dare I say slightly stylish location of the Cressex Community School on Aylesbury. The location, well the bits put aside for the show anyway had more in common with that of a modern trade show facility than a a school, which meant lots of light, high ceilings and plenty of space, a contrast to the location of previous years which has simply been outgrown due to the success of the show.

Ian Mellors, that's him by the way in the shot above, very kindly gave up his Saturday and travelled all the way down from Mansfield to help play trains. This is the third year in a row that I've been in dept to Ian for his assistance, so as soon as he gets his new O gauge layout onto the road I hope to return the favour many times over.

Brewhouse Quay, or 'BQ' as I call it behaved as it should, even the wagon turntable shunt worked most of the time, but I really must address the doors that the wagon exit through backscene (seen just to the left of Ian's hand), it's a little too tight for comfort.

Enough for now. I'm in a but of a rush, but here's to Wycrail '13, and if you want to see the wagon tuntable in action, go here http://www.youtube.com/watch?v=PP1UA4ZxN6A&list=UUPN8LPbSP1wCVX3zr2jSf2Q&index=2&feature=plcp

Model Rail - December 2012 (173)

Model Rail Day has come around again!

• Review: Dapol 57XX 0-6-0PT in N
• Hornby 'Maple Leaf' Class 67
• N Gauge Society LMS saloon
• Dapol O gauge open wagons
• Bachmann 'Improved Director' 4-4-0
• Truetexture lasercut window frames
• Hornby Class 92
• Graham Farish autoballaster in N
• Layout: Medstead & Four Marks layout in OO
• 6 x 4 by Paul Lunn
• Layout: Dduallt - FR layout in OO9
• How to:
• Use filler
• Detail a tank wagon kit - George Dent
• Finish a 'Q1' loco - Spencer Pollard
• Em-bell-ish an 'A4' - Chris Leigh (inspired by 60010)
• Easy evening projects - Peter Marriott
• Detail a budget diesel - George Dent
• Model Rail meets Ian Futers
• Wheels of Steel - Ben Ando
• Layout:Liverpool Lime Street EM gauge layout
• Q&A
• Show and Tell
• George's Modelling Diary
• Backscene

Visit the Model Rail website to order your copy, or pop down to the shops!

Some preview shots of the wonderful layouts within - all based on real locations!

Medstead & Four Marks - photo: Chris Nevard/Model Rail

Dduallt - photo: Chris Nevard/Model Rail

Liverpool Lime Street - photo: Chris Nevard/Model Rail