'Winston' photographed for my entry in the the 'Your Model Railway Forum' World Wide Wagon Tour on 23 January 2010. Catcott is stage 4 of a tour of one of many layouts on route and will culminate at the Kernow Model Railway Exhibition 4&5th September 2010.
Fingers crossed the various postal services will allow this wonderful tour to complete! And yes, that is me driving it (aided with Photoshop) - for a bigger version of the photo above click here!
The move finally went to plan and the model railways have been coming out of 'Big Yellow' storage in dribs and drabs. Here is some of the collection housed in the smallest of the bedrooms temporarily whilst I ponder on demolishing the monstrosity of a concrete pre-fab garage and building a new bespoke wooden garage/railway room.
'Greyhound T9' & Austerity 'Errol Lonsdale' make light work of a Medstead bound working just west of Ropley, Spring 1985. Rolleicord, Agfachrome 100 Pro
Back to the mid 1980's photography was simple and technology was not running away with itself. In those days it was what you put in the camera that counted, that and a degree of skill - no review screen in those days! This shot I recall at the time was to test out some new all singing & dancing Agfachrome 100 that had just appeared as a faster rival to the long lived 50 asa (iso) CT18. The camera, a late 1950's Rolleicord 5a twin lens reflex.
I didn't use the Agfachrome again, the result being a little muddy compared to Ektachrome and the new in your face Fujichrome RDP 100 that had just come onto the market. Still, with relatively inexpensive medium format scanners and a touch of photoshop we can now compensate for the film's possible shortcomings.
With an impending move to a new house, I thought it best to avoid having the removal company having anything to do with the model railways. To get around this I've hired storage at Big Yellow so the layouts can be out of harm's way on the move day. I can then pick them up at my leisure after we've settled in (OK, the following day!).
Here's the beast that is Cement Quay riding in luxury down the corridors of Big Yellow. I could do with one of these trollies when taking a layout to an exhibition!
A spanking gleaming brand new Bachmann BR Std. 3MT with an ex GWR B set slows for Catcott Burtle.
In ready to run form, the nearest prototype we’ve had to this is probably the Bachmann Ivatt Class 2 tank which despite being a good model in its day is now getting a little long in the tooth.
Enter the Bachmann BR Std. 3MT 2-6-2; the first thing I noticed was the new style of smart packaging which allows one to see the actual model without having to open the box. The way this has been done is very innovative, though I must admit that it took me a couple of minutes to work out how to get in - the clear sleeve confusing me!
First impression is the super fine paint job, the green having a wonderful freshly polished look about it with very finely executed lining in finest Swindon style. Examining the locomotive in greater detail I thought that maybe I had some grease from my dinner on my hands, but no, the chassis is very heavily lubricated with some kind of light machine oil with appears to get everywhere. I guess this is to ensure the fine valve gear and other moving parts have minimal friction – maybe a tad overdone with this particular example.
The locomotive is very finely detailed, and if you’re comparing it to the old Ivatt Class 2 tank, this is a totally different beast – it looks absolutely stunning with the level of delicate detail and finish possibly setting it above what could be achieved with even the finest crafted kit.
As for strict millimetre accuracy I won’t comment because I’m not a ‘loco-ist’, but to me it captures the feel of the real thing perfectly, with the ¾ rear view being particularly attractive.
After adding the detail pack (which I have to say was a doddle even after a couple of pints of ale) it was time to run the loco in. Most will test the running before adding the detail pack just in case it's duff and needs to be returned, I rarely use common sense when it comes to model railways!
Last night my circle of track was laid (3rd radius set-track is about as tight as one can go with the front steps added) and the pretty little locomotive was given a good running-in to get everything to bed in nicely. After about an hour of silky smooth gliding around the circle of track in both directions, it suddenly ground to a halt. I thought at first the cat had swiped the locomotive, but no, the eccentric crank on one side had somehow or other come adrift and could be seen swinging from the expansion link even though the retaining screw was still in situ.After bit of muttering and the use of a small screwdriver, I managed a successful reassembly (with a dash of cyano for good measure which will no doubt void the guarantee) and all is now well. In time it will be interesting to read whether anyone else suffers this problem.
Eccentric crank aside, which is down to poor assembly; you may have read recently in the modelling press about that maybe RTR is becoming too delicate? Until now I dismissed those letters as being penned by ham-fisted people that maybe should take up another hobby like boxing or caber tossing. Whilst the new 3MT is incredible on the fidelity front, it is almost impossible not to distort or dislodge some of the detail when handling it even with utmost care.
My kit built locos are far more tolerant in this respect, because brass or nickel silver is used for the fine detail rather than flimsy low cost ABS plastic. I wonder if the manufacturers need to look at using such materials rather than plastic - many I'm sure would pay the extra few quid to have something that doesn't fall apart every time it's handled. We cannot expect or want the manufacturers to reduce the level of detail we have come to expect in recent years, but maybe the materials used need to be addressed – what do you think?
Verdict:
No snow, sparkles or bright coloured baubles here, but a picture of an early sunny morning in late summer:
Now in private ownership, Radstock's former Lancashire and Yorkshire Railway 'Pug' 0-4-0 51202 is captured pottering about with high exposives on a little used section of Cement Quay. Apart from the fake clag, there is no computer jiggerypokery with this snap.
A short while ago I detailed up and repainted the Hornby 'Pug' bought on Ebay. The wagons are from various kits, some of which are getting on for 30 years old, they were recently refurbished to bring the weathering up to current expectations (I hope!).
The cement loading thingamywhotsit is a modified and repainted Skaledale ready to plant structure, the aerial conveyor is Cornerstone (Walthers). Grass is Mini-Natur applied with a Grasmaster, other rocky detritus is the real thing from from Midford in Somerset which was scaled down using a hammer.
A bit of trial and error was used to mark out and then cut up some stone effect plastic sheet. I used what I had to hand which looks a little like the smaller stone used in the Mendip area.
card. Some Wills corrugated sheeting was laid over to complete the effect. Masking tape was used to create the effect leading between the roof and the shaft.
Highbridge's Johnson 1P 4-4-0 No. 58086 glides past Combwich signal box with an afternoon service from Templecombe. The 6 wheeled milk tank was probably picked up from Bason Bridge.
To celebrate its 30th birthday, Combwich will next be shown at Wycrail Saturday 6 November 2010 - find out more!
I wasn't totally happy with the look of the foliage on the two major trees on Catcott - it was a little heavy, lifeless and a tad matted. So, a couple of days ago I removed the trees and further teezed the foliage (Woodland Scenics scatter on their Polyfiber) apart to make it very see-through.
A fresh coat of Woodland Scenics 'mid green course turf' and Sylvia wood based scatter a French make picked up at RailExpo '07 in Paris were both applied to diluted PVA. Further light colour adjustment was with aerosol (Racing green amd some 1970's Ford beige) and a diluted bespoke acrylic/pva mix to reduce the playgroup green of commercial scatters. I find diluted PVA far better than the more common hairspay for fixing such into place. Cheaper too!
43017 drops off a couple of empty covered vans for bagged peat traffic at Catcott Burtle. September 1953. I think the 'Doodlebug' (Bachmann) looks very American in poise from this angle.
The 'BR-ised' former private owner wagon started life as a private owner Dapol freebee when I renewed my BRM subs. I should sort out some faded running numbers ... not enough days, too little time - a bow pen with some pale grey paint should suffice eventually....
To get such a great depth of field in this shot, two identical image focussed on different key points were combined in Photoshop CS3 using the layer stacking tool in 'Scripts'. A quick 'Google' will show you how.
Bath's Black 5 No. 45440 was normally limited to the 'Mainline', but on this rare occasion in the late summer of 1956 it was caught dropping off a bogie bolster wagon at Catcott Burtle.
I've had problem with this renumbered Hornby Black 5 never running that well. A few months ago I took the chassis apart to sort out the pickups. The result being that it stopped running completely - the pick-ups being held in place a very odd way. Anyway, to cut a long story short and with my new reading glasses to actually see what I'm doing, I had another go which was successful. 3 hours running in on a circle or track later (dodging the cat who kept trying to knock the loco off) and we have a very sweet runner indeed! Result! There's scope for further weathering in due course - jobs like that are best never rushed.
The baloney....
58086 slows for Catcott with an afternoon service from Templecombe in August 1956.
Actually..... the real reason for this shot is to show off the topped up static grass using a Noch Grasmaster. The grass on the embankment was a little short, we all know that in real life (though very rarely modelled because most modellers are blind to anything outside the 4 foot because they're so wound up about the rather time expired 16.5mm vs 18.2 vs 18.83mm debate aka 'gauge rage') that rough wild grass can grow to in access of 4 feet in the summer months. The joy of static grass is that to gain extra height all one has to do is build up another layer on top of what's aleady there. The trick is to use paler more straw like tones for the top layer so as to depict the dead feathery tops.
British Rail Class 121, number W55033 slows for Catcott Burtle with a Glastonbury to Highbridge shuttle in September 1971.
The unit here is a 'cut and shove' from a Lima 2 car unit in the early 1980's. Recently a Black Beetle power unit replaced the time expired Lima pancake unit. The chassis needs a little work to straighten it out!
The real W55033 now lives on the Colne Valley Railway.
Recently I inherited a dozen or so mineral wagons made up from 1960's vintage Airfix kits. Whilst they were very well made, the builder never painted them but did add the transfers. In an attempt to bring them up to modern expectations but without the additional work of stripping all the transfers off I decided to weather them as I do my buildings. When performing this, I drybrush on various greys, rust reds and then dust on grey primer and matt black from Halfords aerosols. An effective and quick fix - just another 10 or so to do!
The bull: With Driver Bearton in charge, Virgin Class 57 No. 57307 'Lady Penelope' is captured passing through the 'heritage station' of Catcott Burtle with a Westbury to Moorswater cement working.
The model: a Bachmann Class 57, the layout is my 'could have been' 1950/60's depiction of the rural Somerset Levels.
Radstock's 'Pug' No 51202 made a very unusual appearance shunting the sidings at Catcott Burtle one bright Tuesday in September 1952.
The 'Pug' which is a 2004 vintage Hornby offering was picked up on Ebay back in the summer. I have added additional detail, a repaint, renumber and weathering. Much to my surprise it is a delightful runner. Opening out the wheel back-to-backs to just under 15mm have minimised any tendency to waddle and allow the little loco to negotiate C&L pointwork with no problems. Prototypically, the overall look is quite close, the thickness of the cab apertures are probably the weakest link.
The Austin 7 is from a Springside kit.
The reality: this is just an excuse for another shot of my re-chassied and detailed up 1981 vintage Airfix Midland 4F as it is captured sliding across into the short siding at Catcott Burtle.
The bull: Midland 4F No. 44417 became the subject for well known SDJR photographer Ivan Locksmith to test out some Ektrachrome X on his new Planar lensed Rolleiflex f3.5. The location is Catcott Burtle and the date is 21 August 1961.
Templecombe's Midland 4F No. 44417 is captured here trundling through Catcott Burtle with what I imagine is an Evercreech Junction to Highbridge goods. The slide mount on the colour transparency would suggest that the Kodachrome II slide was captured on the photographer's new Voigtländer Vitomatic II in the late summer of 1963. Has anyone any further thoughts on this?
Well, Cement Quay and its new 'mini me' survived it first outing in extending form at the excellent Wycrail. Not only is the layout 60% bigger it's also higher (4ft 3") - it now sharing Catcott Burtle's legs and drape, which I hope improved the experience for viewer.
Just after the doors opened, some weird electrical fault cause total failure for a minute or two, I think this may have been caused by me snagging the wiring loom whilst rather hastily shoving the dustbin liner cocooned layout into the car during a rain storm on Friday night. A grope of the wiring to ensure that maybe a couple of droppers weren't touching and shorting appeared to solve the problem (I have a 1978 MGB with Lucas/Prince of Darkness electrics so I'm used to groping electrics in a mindless way to get a result).
Ergonomically the layout really is too big to use the original control panel on one end which was OK for a layout which in its original form was just over 5 feet long. I'm tempted to simply go back to manual under baseboard push pull point control using rods which is simple to work and easy to fix. The same will be said of the Spratt and Winkles, whilst they uncouple when you want them to, they also do the same thing when you don't. Additionally the hook tends to get in the way and bind with loco buffer beam detail and cause the odd derailment when going over a crossover. So, back to three links in due course I fear - they're bullet proof and so easy to install (I'm still 3 link with all my steam stock and it's going to remain that way).
I still need to sort out the lighting on the extension, it doesn't match the main section despite same scenic colours and illumination. The problem lies with the bulb positioning which I'll address in due course.
Picture above: next outing will be steam/early diesel (not forever) - I favour the idea of and evolving layout to keep things fresh.
Cement Quay and its 'bit on the side', 'little bother', 'son of', big sister or whatever you want to call it hits the road this weekend for one day only in its extended format at the highly regarded Wycrail in High Wycombe.
Wycrail, the annual show of the High Wycombe and District Model Railway Society is held at the beginning of November at:
John Hampden Grammar School
Marlow Hill
High Wycombe
Bucks HP11 1SZ
Open 10am till 5pm
See you there?
